NEEDLE PUNCHING PLANT WITH OPTIONS FOR THERMOBONDING & CALENDER LINE WIDTH 530 CM YEAR 1978-1998
Width: 5300mm
Year 1978-1998
For production of miscellaneous felt production e.g. geotech, indutech, packtech in the range of approximately 150 - 2000 gsm, consisting of;
- 1 x Befama CU691.11/2500 card, yoc: 1995, ww: 2500 mm, capacity 500 kgs/hr, ww: 2500 mm, volumetric chutefeed weigh controlled by Micro XL chute from Garnett integrated with main control panel, avantrain - dia 680 mm with 2 workers/strippers, main swift - dia 1500 mm with 4 workers/strippers, top doffer - dia 500 mm and bottom doffer - dia 680 mm.
Side-suction on card goes back to feeding.
- 1 Autefa Crossliner 2000 crosslapper, yoc: 1988, ingoing 2500 mm/outgoing 5400 mm, speed 80 m/min, Siegling conveyor belt
- 1 Fehrer NL21 needle-loom, ww: 5300 mm, yoc: 1978, adjustable infeed, double needle-boards
- 1 Bombi CAL/2C/S oil-heated thermobonding and calibrating calender, ww: 5300 mm, yoc: 1998, with 2 hot rolls - dia 550 mm, each with independent temperature control, fine rolls distance regulation, cross-axis device to reduce roll bending during pressing, pressure by two pneumatic pistons, 8000 kgs., oil heating station with gas burner, capacity 90,000 kCal/hr, electric motors.
- 1 slitting (5 length slitters, 2 edge slitters), transversal cutter and winding on 120 mm dia paper-core tubes.
Installed effect 122 kW.
Line is mainly controlled by Siemens and Protec.